Before Operation
Timer Function
With the TIMER function you can have the radio recep- tion, CD play and USB play turned on and off at the time desired.
1 Press CLOCK to check the current time.
For your reference
If you don’t set clock, timer function doesn’t work.
2 Press 
TIMER to enter the timer setting mode. TUNERtDVD/CD tUSB flash in the display win- dow in turn.
For your reference
If you want to correct the previous memorized TIMER setting, press and hold the 
TIMER button more than 2 seconds.
-The previous memorized timer setting for on Time and “
” indicator appears in the display window.
3 Press SET/CD[] when the desired function flashes.
4 1. When you select the TUNER function, Select the previous memorized preset
number with . bb/BB > on the front panel and press SET/CD[].
‘ON TIME’ indicator appears for about 0.5 sec- onds in the display window and then disappears.
2.When you select DVD/CD or USB function, ‘ON TIME’ indicator appears for about 0.5 sec- onds in the display window and then disappears.
5 Set the hour to switch on by pressing
. bb/BB > on the front panel.
| Press SET/CD[] to confirm the turn on hour |
6 time. | |
7 | Set the minute to switch on by pressing |
. bb/BB > on the front panel. | |
8 Press SET/CD[] to confirm the turn on minutes time.
‘OFF TIME’ indicator appears for about 0.5 seconds in the display window and then disappears.
Set the hour to switch off by pressing | |
9 . bb/BB > on the front panel. | |
10 | Press SET/CD[]. |
11 | Set the minute to switch off by pressing . |
bb/BB > on the front panel. | |
12 | Press SET/CD[]. |
13 | Adjust the volume level by pressing | ||
. bb/BB > on the front panel. | |||
14 | Press SET/CD[]. | ||
“ |
| ” appears in the display window and the timer | |
| |||
| setting has been completed. | ||
15 | Turn the system off. | ||
The selected timer functions are automatically | |||
switched on and off at the preset times.
To cancel or check the timer
Each time the 
TIMER button is pressed you can select the timer set or cancel. You can also check the timer setting status.
To activate or check the timer, press the 
TIMER button repeatedly so that “
” appears in the display window.
To cancel the TIMER, press the 
TIMER button repeat- edly so that “
” disappears from the display window.
Using Microphone
You can sing to a music source by connecting a microphone to the unit.
1 | Connect your microphone to the MIC socket. |
“ ” will be shown in the display window. | |
2 | Play the music you want. |
3 Sing along with the accompaniment. Adjust the microphone volume by turning MIC VOLUME KNOB.
otes
When not using the microphone, set the MIC volume knob to minimum or turn off the MIC and remove the microphone from the MIC socket.
If the microphone is set too near the speaker, a howling sound may be produced. In this case, move the microphone away from the speaker or decrease the sound level by using the MIC volume control.
If sound through the microphone is extremely loud, it may be distorted. In this case, turn the MIC volume control toward minimum.
To Adjust ECHO Volume
You can give an echo effect to the sound from the microphones.
Press the ECHO VOL. ( 
/ 
) on the Remote Control to increase the echo volume or decrease it.
PREPARATION
11
