Connections
Connecting to a TV
Make one of the following connections, depending on the capabilities of your existing equipment.
ips
Depending on your TV and other equipment you wish to connect, there are various ways you could connect the unit. Use one of the connections described below.
Please refer to the manuals of your TV, VCR, Stereo System or other devices as necessary to make the best connections.
Caution
–Make sure the unit is connected directly to the TV. Select the correct AV input on your TV.
–Do not connect your unit to TV via your VCR. The DVD image could be distorted by the copy protection system.
Video connection
Connect the MONITOR OUT jack from the unit to the VIDEO IN jack on the TV using the video cable supplied
(V).
S-Video connection
Connect the
Component Video (Color Stream®) connection
Connect the COMPONENT VIDEO (PROGRESSIVE SCAN) jacks from the unit to the corresponding in jacks on the TV using an Y Pb Pr cable (C).
Progressive Scan (ColorStream® pro) connection
If your television is a
Connect the COMPONENT VIDEO OUT (PROGRESSIVE SCAN) jacks from the unit to the corresponding in jacks on the TV using an optional Y Pb Pr cable (C).
ote
–Set the Progressive to “On” in the Setup menu for progressive signal, see page 14.
OPTICAL
IN
SURR. CENTER SURR. FRONT FRONT
FM | R (4‰) | (4‰) | L (4‰) R (6‰) L (6‰) |
| L |
|
|
GND | A |
|
|
| U |
|
|
AM | X |
|
|
R |
|
| |
|
|
| |
. |
|
|
|
C SV
| COMPONENT VIDEO / | VIDEO | ||
PROGRESSIVE SCAN INPUT | IN | IN | ||
Y | Pb | Pr |
| L |
|
|
|
|
Rear of TV
PREPARATION
7