REFRIGERATOR INSTALLATION

LEVELING AND DOOR ALIGNMENT

Leveling

Your refrigerator has two front leveling legs—one on the right and one on the left. If your refrigerator seems unsteady or you want the doors to close easier, adjust the refrigerator’s tilt using the instructions below:

1.Plug the refrigerator’s power cord into a 3-prong grounded outlet. Move the refrigerator into its final position.

2.Turn the leveling leg clockwise to raise that side of the refrigerator or counterclockwise to lower it. It may take several turns of the leveling leg to adjust the tilt of the refrigerator.

NOTE: Having someone push against the top of the refrigerator takes some weight off the leveling legs. This makes it easier to adjust the legs.

3.Open both doors again and check to make sure that they close easily. If not, tilt the refrigerator slightly more to the rear by turning both leveling legs clockwise. It may take several more turns, and you should turn both leveling legs the same amount.

4.Re-adjust if necessary.

5.Replace the base cover.

NOTE: Your new refrigerator is uniquely designed with two fresh food doors. Either door can be opened or closed independently of one another. You may have to exert slight pressure on doors to get them to close completely.

Door Alignment

If the space between your doors is uneven, follow the instructions below to align the doors:

1.With one hand, lift up the door you want to raise at middle hinge.

2.With other hand, use pliers to insert snap ring as shown.

3.Insert additional snap rings until the doors are aligned. (Three snap rings are provided with unit.)

15

Page 15
Image 15
LG Electronics LFC25760 manual Leveling and Door Alignment