Parts, Tools, Materials

You will need the following tools and materials for the installation:

Carton or other heavy material such as a blanket for covering the counter top.

Clear Tape

(for taping the templates to the wall)

Saber Saw

(for cutting vent holes for roof or wall vending)

Phillips Screwdriver

(for the screws)

Pencil

Stud Finder or Thin Nail

Keyhole Saw (for the power cord hole)

Electric Drill

3/8" and 3/4" wood drill bits

1/2" and 3/16" drill bits

Flat Blade Screwdriver

(for the toggle bolts)

Plumb Line

Measuring Tape (metal preferred)

Duct Tape

Small Side Cutters or Tin Snips

Caulking Gun and Caulk

If you have brick or masonry walls, you will need special hardware and tools.

The ductwork you need for the installation is not included. All wall and roof caps must have a back-draft damper. (Shown on page 5).

6

Page 6
Image 6
LG Electronics LMV1630WW, LMV1630BB installation instructions Stud Finder or Thin Nail