STEP 3: Prepare The Venting Blower
ROOF-VENTED INSTALLATION:
1.Remove one blower unit mounting screw and one or several blower plate mounting screw(s). Remove the blower plate from cabinet. See Figure 19.
2.Carefully lift the blower unit out of the microwave oven.
3.Rotate blower unit 90˚so the exhaust ports face the top of the cabinet. See Figure 20.
4.Place blower unit back into microwave oven.
5.Use side cutter or tin snips to cut and remove knockouts
"A" from blower plate. Discard knockouts. Be careful not to distort the plate. See Figure 21.
6. Reattach blower plate to microwave oven.
Attach with the one blower unit mounting screw and then the two blower plate mounting screws . See Figure 22.
blower plate mounting screws
blower plate
blower unit mounting screw
Figure 19
Blower Unit
Figure 20
Knockouts "A" | blower unit | blower plate |
|
| mounting |
|
| screws |
blower plate |
|
blower plate | blower unit |
Figure 21 | mounting screws |
Figure 22
– 12 –
