CAREANDCLONING
LIGHT BULB REPLACEMENT WARNING
Electrical Shock Hazard
•Before replacinga burned-out light _lb, eitherunplug
the refrigeratoror turn off _wer at the circuit brewer
orfuse box.
NOTE: Moving the @ntrol to the OFF position
does not remove power to the light cir_it.
NOTE:
• Not all appliance bulbs will fit your refrigerator.
Be sure to replace the bulb with one of the
same size, shape and wattage.
•The light bulbs will turn off if door is left open for
seven continuous minutes. Shutting door for
one second will light bulbs to come back on.
•There is a safety thermal protector in the "fresh
food" compartments interior lights to prevent
over heating if the door is left open too long,,If
the lights go off bemuse the thermal protector
is activated, close the doors and allow 10
minutes for the thermal protector to reset,,
To change freezer light:
1. Unplugrefrigerator power cord form outlet.
2. Using a fiat instrument,gentlyp_ the lamp cover
Ioo_ inthe front as shown. Rotate downward to
removethe reartabs.
3. Make sure the bulb is cool to the touch. Turn the
bulbcounterclockwise to remove.
4. Replace witha new 60-watt applianco bulb_
5. inserttabson ba_ of cover into slots in freezer
ceiling.
Pushcover up to snap front into placo.
I
..........................................................................................................................................................................................................................................................................................................................................................................................................................................J