LG Electronics LRE3012S Part 4 INSTALL THE RANGE, Anti-Tip Device Installation, English

Part 4 INSTALL THE RANGE

Replace the access cover on the range back. To replace the wire cover, insert double projections in the pockets located below the opening and tighten the three screws.

5ANTI-TIP DEVICE INSTALLATION

WARNING

• DO NOT step or sit on oven door. Install the Anti-Tip Bracket supplied with the range.

-The range could be tipped and injury might result from spilled hot liquid, food, or the range itself.

-If the range is pulled away from the wall for cleaning, service, or any other reason, ensure that the Anti- Tip Device is properly reengaged when the range is pushed back against the wall.

1.Locate the bracket using the template

An Anti-tip bracket is packaged with template. The instructions include necessary information to complete the installation.

Read and follow range installation instruction sheet (template).

2.Level the range

Level the range by adjusting the leveling legs with a wrench.

Use a spirit level to check your adjustments. Place the level diagonally on the oven rack, and check each direction for level.

First check direction 1 .

After check direction 2 .

If the spirit level doesn’t show level on the rack, adjust the leveling legs with a wrench.

6FINAL INSTALLATION

•Move range close enough to the opening to plug into the receptacle.

•Slide range into position insuring that the left back leg slides under the anti-tip bracket. Range will sit 0” away from the back wall when properly installed.

•Carefully tip range forward to insure that the anti-tip bracket engages the range back brace and prevents tip-over.

•Turn on electrical power. Check range for proper operation as described in owner’s manual.

ENGLISH

9