Ch3. System information „ Fn key combinations

Ch3. System information

The following table shows the function of each combination of Fn with a function key. Function of Fn keys has nothing to do with Operating System.

	[Fn] +	Description

	[F1]	User-defined Hot key. (Setting is available at OSD)

	[F2]	User-defined Hot key. (Setting is available at OSD)

	[F3]	User-defined Hot key. (Setting is available at OSD)

	[F4]	Force the computer to enter power-saving mode. (ex: system standby and hibernation)

		TouchPad Disable (Impossible to use TouchPad) / TouchPad Enable (Possible to use
	[F5]	TouchPad) / TouchPad Auto-Disable (When connecting USB mouse to the computer,
	[F5]	TouchPad is disable) The TouchPad initialization takes 1~2 seconds, so wait for the

		Initialization to end before using the TouchPad.

	[F6]	Wireless LAN on / off

		When the computer is attached to an external monitor, you can changed the display output
	[F7]	location with [Fn] + [F7] combination. You can switch to and from the three types of display
		modes, LCD display only, the external monitor only, or both at the same time.

	[F8]	Enable/Disable Auto Sound power management (battery mode only).

	[F9]	Enable/Disable Auto Brightness control.

	[F10]	System information

	[ESC]	Maximum power-saving mode. (when OSD is installed)

	[ScrLk]	Number lock

	[Delete]	Brightness up

	[Insert]	Brightness down

		PgUp

		PgDn

		Home

		End

	[F12]	Maximum power-saving mode.