Care and Maintenance
Freezer compartment lamp
Freezer compartment shelf
Door rack and support
Ice storage bin
How to remove and replace parts
NOTE
•Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly. Never apply severe force to dismantle parts. Parts may be damaged.
Separate the lamp by pulling it out ➂ while | 3 | 2 |
|
slightly striking ➀ and rotating ➁ the lamp cover. |
| ||
Turn the bulb counterclockwise. Max. 40 W bulb | 2 | 3 | |
for refrigerator is used and can be purchased at |
| ||
a service center. |
| ||
|
| ||
To remove a shelf, push the shelf to the left , |
|
|
|
lift the left part of the shelf a bit , lift the right |
|
|
|
part up ➂ , and take it out. |
|
|
|
Lift the door rack holding both sides and |
|
|
|
pull it out . |
|
|
|
Hold the ice storage bin as shown in the right |
| 1 | 2 |
figure and pull it out while slightly lifting it . |
| ||
Do not dismantle the ice storage bin unless |
| ||
it is necessary. |
| ||
Use both hands to remove the ice bin to avoid |
| ||
dropping it. |
|
|
|
After dispenser is used
The water collector has no
23
