Installation
Where to install
Strong | Unstable installation may cause vibration and | Height |
and even floor | noise. If the floor to install the refrigerator on | |
| is not even, make the refrigerator level by | |
| rotating the height adjusting screw. Carpet | |
| or floor covering on which a refrigerator is | |
| installed may be discolored by heat from the |
|
| bottom of the refrigerator. |
|
| Do not allow carpet or flooring to block |
|
| airflow under the refrigerator. |
|
Select a good location
1.Place your appliance where it is easy to use.
2.Avoid placing the unit near heat sources, direct sunlight, or moisture.
3.To ensure proper air circulation around the refrigerator, please maintain sufficient space on both the sides as well as top and maintain at least 2 inches (5 cm) from the rear wall.
4.To avoid vibrations, the appliance must be leveled.
5.Don't install the appliance below 5°C (41°F). It may cause affect the performance.
More than 2"(5 cm) to back
Where water supply can be easily connected in a dry place
Select a place where a water supply can be easily connected between the automatic ice maker and dispenser.
Installing the refrigerator in a wet or damp area may cause rust and may be an electrical hazard.
Bottom Pad
Where it is free from heat
If this refrigerator is installed where the ambient temperature is high, the freezing capacity is deteriorated and the cost of electricity used increases.
NOTE
•Install the refrigerator at a place where the ambient temperature is 5˚C ~ 43˚C (41˚F~110˚F).
Ambient temperature outside this range may cause product malfunction. Also, the tube between the dispenser and automatic ice maker may freeze.
5
