LG Electronics 32LD7***, LSW400BG, LSW200BG, LSW200BXG, PSW400BG, PSW600BG, LSW100B System

	PREPARATION
	KENSINGTON SECURITY
	SYSTEM
	■ This feature is not available for all models.
PREPARATION	■ Image shown may differ from your TV.
	The TV is equipped with a Kensington Security
	System connector on the back panel. Connect
	the Kensington Security System cable as shown
	below.
	For the detailed installation and use of the
	Kensington Security System, refer to the user’s
	guide provided with the Kensington Security
	System.
	For further information, contact http://www.kens-
	ington.com, the internet homepage of the
	Kensington

CAREFUL INSTALLATION ADVICE

■You should purchase necessary components to fix the TV safety and secure to the wall on the market.

■Position the TV close to the wall to avoid the possibility of it falling when pushed.

■The instructions shown below are a safer way to set up the TV, by fixing it to the wall, avoid- ing the possibility of it falling forwards if pulled. This will prevent the TV from falling forward and causing injury. This will also prevent the TV from damage. Ensure that children do not climb or hang from the TV.

1 1

company. Kensington sells security systems for

expensive electronic equipment such as note-

book PCs and LCD projectors.

2

2

NOTE

►The Kensington Security System is an optional accessory.

►If the TV feels cold to the touch, there may be a small “flicker” when it is turned on.

This is normal, there is nothing wrong with TV.

►Some minute dot defects may be visible on the screen, appearing as tiny red, green, or blue spots. However, they have no adverse effect on the monitor's performance.

►Avoid touching the LCD screen or holding your finger(s) against it for long periods of time. Doing so may produce some temporary distortion effects on the screen.

A-22

1	Use the eye-bolts or TV brackets/bolts to fix the
	product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then bolts.)

*Insert the eye-bolts or TV brackets/bolts and tighten them securely in the upper holes.

2	Secure the wall brackets with the bolts on the
	wall. Match the height of the bracket that is

mounted on the wall.

3

3 Use a sturdy rope to tie the product for align- ment. It is safer to tie the rope so it becomes horizontal between the wall and the product.

NOTE

►When moving the TV undo the cords first.

►Use a platform or cabinet strong and large enough to support the size and weight of the TV.

►To use the TV safely make sure that the height of the bracket on the wall and on the TV is the same.

Downloaded From TV-Manual.com Manuals