Xerox 701P46985 manual Installation worksheets, Using the installation worksheets

Installation worksheets

The Getting Ready for the Xerox® FreeFlow® Print Server 6.0 Installation guide has been developed for you to use in the gathering of the technical data required by the Xerox personnel during installation of your customer’s print server hardware and software. It is used in conjunction with the appropriate printer installation planning guide.

Using the installation worksheets

The Xerox printer with FreeFlow Print Server software provides a wide range of network printing services on industry-standard networks, and consists of the following:

•A UNIX-based computer workstation with a Xerox interface PWB and FreeFlow Print Server software installed.

•A supported Xerox printer.

Getting Ready for the Xerox FreeFlow Print Server 6.0 Installation contains the worksheets that must be completed to support the installation of the Xerox FreeFlow Print Server software on the server.

When these worksheets are completed they will contain a record of the state of the system at the time of install. Most likely, this setup and configuration state will change, so encourage your customer to keep these worksheets with the service record of the printer for future reference.

Your customer should not complete the worksheets if they are not sure of the required information. Always encourage them to contact the next level of technical support within their organization for assistance.

NOTE: Worksheet W-5, the Novell NetWare gateway installation worksheet, refers to on-site setup requirements that your customer’s network administrator should already have implemented prior to the FreeFlow Print Server install. The values for the data elements entered during that setup activity should be recorded on this worksheet.

XEROX FREEFLOW PRINT SERVER	1
GETTING READY FOR THE PRINT SERVER INSTALLATION