Xerox 701P46985 manual W-8 AppleTalk Gateway installation worksheet, W-8data element definitions

FREEFLOW PRINT SERVER 6.0.xx

W-8: AppleTalk Gateway installation worksheet

If the customer has purchased the AppleTalk Connectivity —

Apple PAP gateway, fill out this worksheet.

Item # Data Element

1AppleTalk Phase Type

2AppleTalk Zone Name

Customer Value

W-8 data element definitions

AppleTalk Phase Type: There are three AppleTalk Phase Types:

•Phase 1 (non-extended network) is a single physical network that can support up to 254 mode addresses (devices). There is only one network number and one zone assigned to the network.

Phase 1 is not configured as Phase 1, but should follow the Transition mode install procedure. This is done so that Macintosh Transparent Printing can be enabled.

•Phase 2 (extended network) is a network in which there are two or more network numbers assigned to a single physical network. Each network number on an extended network is an addressing channel that can support 253 devices and only one zone name. Phase 2 routers can be configured to support non-extended networks.

•Transition mode (Phase 2 Transition) is a way of configuring a Phase 2 router so that it can function on an Internet that includes Phase 1 routers. Since Phase 1 routers cannot recognize multiple network numbers or multiple zones on a network, a Phase 2 router in the transition mode is deliberately limited to addressing only 253 devices.

You can determine which EtherTalk phase type is running by completing the following steps:

1.Select the Control panel from the Apple Menu Icon (upper left corner of the screen on a Macintosh).

2.Double-click the Network icon.

3.The icon describes the phase type:

a.An icon showing two single opposing arrows represents EtherTalk 1.0 (Phase 1).

b.An icon showing two double opposing arrows represents EtherTalk 2.0 (Phase 2).

24	XEROX FREEFLOW PRINT SERVER
	GETTING READY FOR THE PRINT SERVER INSTALLATION