LG Electronics LW1004ER, LW1204ER, LW1404ER, LW1804ER Window stool between the side window stop

CabinetInstallation

1 Open the window. Mark a line on the center of the	Sill
window stool between the side window stop	Bracket 3
moldings.	Carriage
Loosely attach the sill bracket to the support
	Bolt 9
bracket using the carriage bolt and the lock nut.

Support Bracket 2

Lock nut 4

Fig. 12

2Attach the sill bracket to the window sill using the screws (Type B).

Carefully place the cabinet on the window stool and align the center mark on the bottom front with the center line marked window stool.

	Machine screw(Type D)
Cabinet	and lock nut
Track hole	Outer edge
	of window
Support	sill
Bracket 2
Carriage bolt	6 (Type B)
	Sill bracket 3
and lock nut

Fig. 13

3Using the M-screw and the lock nut, attach the support bracket to the cabinet track hole. Use the first track hole after the sill bracket on the outer edge of the window sill. Tighten the carriage bolt and the lock nut. Be sure the cabinet slants outward.

CAUTION: Do not drill a hole in the bottom pan. The unit is designed to operate with approximately 1/2" of water in bottom pan.

Upper Guide

Window stool Front angle

Fig. 14

4Pull the bottom window sash down behind the Top retainer bar until they meet.

NOTICE :1. Do not pull the window sash down so tightly that the movement of Frame curtain is restricted.

Attach the cabinet to the window stool by driving the screws (Type B) through the cabinet into window stool.

2.The cabinet should be installed with a very slight tilt downward toward the outside.

Window sash

Foam -Seal 11

Cabinet

Frame curtain

Foam-PE

Upper

14

Guide

Fig. 15

22