32
When the self-clean cycle is done
• It will not be possible to open the oven door until
oven temperature has cooled.
After the self-clean cycle
• You may notice some white ash in the oven. Wipe
it off with a damp cloth after the oven cools.
These deposits are usually a salt residue that
cannot be removed by the clean cycle.
If the oven is not clean after one clean cycle,
repeat the cycle.
• If oven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and rack
supports with a small amount of vegetable oil to
make them glide easier.
• Fine lines may appear in the porcelain because it
went through heating and cooling. This is normal
and will not affect performance.
SELF-CLEAN (cont.)
11:35 am
Self Clean
Options
Clean Level
Normal 3H00
Clean Time
Light
2Hours
Normal
3Hours
Heavy
4Hours
To change the setting during the operation
of this self-clean feature:
NOTE:
When using the self-clean feature:
• A self-clean cycle cannot be started if Control
Lock feature is active.
• Once the SELF CLEAN is set, the oven door will
lock automatically. You will not be able to open
the oven door until the oven is cooled. The lock
will release automatically.
• Once the door has been locked the DOOR
LOCKED indicator light will stop flashing and
remain on. Allow about 15 seconds for the oven
door lock to engage.
• The oven can be set the cycle time and start time
again with touching the Options key during the
self-clean feature is operating if it is necessary.
Touch Options.
Touch Lightfor light soil or
Normal for average soil or
Heavy for heavy soil.
Touch STARTto confirm the
change.