35
ENGLISH
To remove the door:
Step. 1
Open the door fully.
Step. 2
Pull the hinge locks
down toward the door
frame to the unlocked
position.
Step. 3
Firmly grasp both sides of the door at the top.
Step. 4
Close door to the door removal
position, which is
approximately 5 degrees.
Step. 5
Lift door up and out until the hinge arm is clear of
the slot.
To replace the door:
Step. 1
Firmly grasp both sides of the door at the top.
Step. 2
With the door at
the same angle as
the removal
position, seat the
indentation of the
hinge arm into the
bottom edge of the
hinge slot. The
notch in the hinge
arm must be fully
seated into the
bottom of the slot.
Step. 3
Open the door fully. If the door will not open fully,
the indentation is not seated correctly in the bottom
edge of the slot.
Step. 4
Push the hinge locks up
against the front frame of the
oven cavity to the locked
position.
Step. 5
Close the oven door.
REMOVING & REPLACING THE LIFT-OFF OVEN DOORDOOR CARE INSTRUCTIONS • Most oven doors contain glass that can break.
Read the following recommendations:
1. Do not close the oven door until all the oven
racks are fully in place.
2. Do not hit the glass with pots, pans, or any other
object.
3. Scratching, hitting, jarring, or stressing the glass
may weaken its structure causing an increased
risk of breakage at a later time.
• Be careful when removing and lifting the door.
• DO NOT lift the door by the handle.
- The door is very heavy.
CAUTION
Slot
Hinge
lock
Lock
Unlock
about 5°
Hinge arm
Indentation
Bottom
edge of
slot
Hinge arm
Hinge lock