To Program Play
You can arrange the order of the tracks on the discs and create your own program. The program can contain up to 20 tracks.
1.Press PROGRAM/MEMO. (or PROGRAM on the remote control) on the stop mode.
2.Press CD SKIP/SEARCH (.m/M>) buttons to select the track you want.
3.Press PROGRAM/MEMO. (or PROGRAM on the remote control).
4.Repeat 1~3.
5.Press CD PLAY/ PAUSE (B/[]).
To check program contents
Press PROGRAM/MEMO. (or PROGRAM on the remote control) on the stop mode.
- A track and program number will be displayed.
To clear program contents
Press PROGRAM/MEMO. (or PROGRAM on the remote control) on the stop mode. And then press STOP/CLEAR on the front panel or STOP(x) on the remote control.
To add program contents
1.Press PROGRAM/MEMO. (or PROGRAM on the remote control) repeatedly on the program stop mode until “Track Number” blinks.
2.Repeat 2~5.
To modify program contents
1.Press the PROGRAM/MEMO.
(or PROGRAM on the remote control) to dis- play program number you want to modify.
2.Repeat 2~4.
About MP3
•An MP3 file is audio data compressed by using the MPEG1 audio
•The unit can not read an MP3 file that has not “.mp3” file extension.
MP3 Disc compatibility with this unit is limited as follows:
1.Sampling Frequency / 8 - 48kHz
2.Bit rate / 8 - 320kbps
3.
4.If you record MP3 files using the software which cannot create a FILE SYSTEM, for example
5.File names should be named using 30 letters or less and must incorporate “.mp3” extension e.g. “********.MP3”.
6.Do not use special letters such as “/ : * ? “ < > ” etc.
7.Even if the total number of files on the disc have more than 1000, it will only be shown up to 999.
About MULTI SESSION
-This function recognizes the multi session disc according to a disc of
ex) If there are MP3 files in the first session, the MP3 file in the first session is only played. If there are only MP3 files in the whole ses- sion, all of the MP3 files in the session are played.
If there is Audio CD in the first session, only the Audio CD in the first session is played.
16