LG Electronics M2062DP, M1962DP owner manual Component mode, 31.5 720 x, 67.5, 720 x 1280 x 1920 x

HDMI - DTV mode

Component mode

Resolution	Horizontal	Vertical
	Frequency(kHz)	Frequency(Hz)
720 x 480	31.469	59.94
	31.5	60
720 x 576	31.25	50
1280 x 720	37.500	50
1280 x 720	44.96	59.94
	45	60
1920 x 1080	33.72	59.94
	33.75	60
1920 x 1080	28.125	50.00
1920 x 1080	27	24
1920 x 1080	33.75	30.00
1920 x 1080	56.250	50
1920 x 1080	67.43	59.94
	67.5	60

!NOTE

Resolution

720 x 480

720 x 480

720 x 576

720 x 480

720 x 480

720 x 576

1280 x 720

1280 x 720

1280 x 720

1920 x 1080

1920 x 1080

1920 x 1080

1920 x 1080

1920 x 1080

1920 x 1080

Horizontal Vertical Frequency(kHz) Frequency(Hz)

15.7359.94

15.7560.00

15.625 50.00

31.4759.94

31.5060.00

31.2550.00

44.9659.94

45.0060.00

37.5050.00

33.7259.94

33.7560.00

28.125 50.00

56.2550

67.432 59.94

67.560.00

EXTERNAL EQUIPMENT SETUP

►Avoid► keeping a fixed image on the set’s screen for prolonged periods of time. The fixed image may become permanently imprinted on the screen use a screen saver when possible.

►►There may be interference relating to resolution, vertical pattern, contrast or brightness in PC mode. Change the PC mode to another resolution or change the refresh rate to another rate or adjust the brightness and contrast on the menu until the picture is clear. If the refresh rate of the PC graph- ic card can not be changed, change the PC graphic card or consult the manufacturer of the PC graphic card.

►►The synchronization input waveform for Horizontal and Vertical frequencies are separate.

►►Connect the signal cable from the monitor output port of the PC to the RGB (PC) port of the SET or the signal cable from the HDMI output port of the PC to the HDMI/DVI IN port on the SET.

►►Connect the audio cable from the PC to the Audio input on the SET. (Audio cables are not included with the SET).

►►If using a sound card, adjust PC sound as required.

►►If the graphic card on the PC does not output ana- logue and digital RGB simultaneously, connect only one of either RGB or HDMI/DVI IN to display the PC output on the SET.

►►If the graphic card on the PC does output ana- logue and digital RGB simultaneously, set the SET to either RGB or HDMI. (The other mode is set to Plug and Play automatically by the SET.)

►►DOS mode may not work depending on the video card if you use an HDMI to DVI cable.

►►If you use too long an RGB-PC cable that is too long, there may be interference on the screen. We recommend using under 5m of cable. This pro- vides the best picture quality.

35