Transmission / Receiving Protocol
01. Power(Command : k)
▲
To control Power On/Off of the Set.
Transmission
[j][Set ID][k][Data][Cr]
Data(ASCII) 000 : Power Off | 001 : Power On |
Acknowledgement
[OK]
02. Source (Command : l)
▲
To select input source for the Set.
You can also select an input source using the SOURCE button on the remote control.
Transmission
[j][Set ID][l][Data][Cr]
Data(ASCII) 000 : RGB | 001 : DVI |
Acknowledgement
[OK]
A4
