LG Electronics M5201Cs manual RS-232CControlling the Multiple Product

RS-232CControlling the Multiple Product

Use this method to connect several products to a single PC.

You can control several products at a time by connecting them to a single PC.

Connecting the cable

Connect the RS-232C cable as shown in the picture.

*The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select an input source or adjust the OSD menu from your PC.

RS-232C

(CONTROL &

SERVICE)

RS-232C Cable (not included)

PC

monitor 1 monitor 2 monitor 3 monitor 4

RS-232C Configurations

7-Wire Configurations (Standard RS-232C cable)

	PC	Monitor
RXD	2		3	TXD
TXD	3		2	RXD
GND	5		5	GND
DTR	4		6	DSR
DSR	6		4	DTR
RTS	7		8	CTS
CTS	8		7	RTS
	D-Sub 9	D-Sub 9
	(Female)	(Female)

3-Wire Configurations (Not Standard)

	PC	Monitor
RXD	2		3	TXD
TXD	3		2	RXD
GND	5		5	GND
DTR	4	6		DTR
DSR	6	4		DSR
RTS	7	7		RTS
CTS	8	8		CTS
	D-Sub 9	D-Sub 9
	(Female)	(Female)

Communication Parameter

▲ ▲ ▲ ▲ ▲ ▲ ▲

Baud Rate : 9600buadRate (UART)

Data Length : 8bits

Parity Bit : None

Stop Bit : 1bit

Flow Control : None

Communication Code : ASCII code Use a crossed (reverse) cable

A1