LG Electronics ME20CR owner manual Connecting with the PC equipment

Connecting the Display

Connecting with the PC equipment

1.	Before setting up the monitor, ensure that the power to the monitor, the computer
2.	system, and other attached devices is turned off.
	Connect signal input cable 1 and power cord 2 in order, then tighten the screw

of the signal cable.

AConnect D-SUB Cable

BConnect DVI-D Cable

NOTE

This is a simplified representation of the rear view.

This rear view represents a general model; your display may differ from the view as shown.

User must use shielded signal interface cables (D-sub 15 pin cable, DVI cable) with ferrite cores to maintain standard compliance for the product.

Varies according to model.

Wall-outlet type

When using a D-Sub signal input cable connector for Macintosh

Mac adapter : For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector.

Connect the signal input cable and tighten it up by turning in the direction of the arrow as shown in the figure.

3. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically.

(Only Analog Mode)

NOTE

‘Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.

‘AUTO’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, select AUTO function to improve resolution. (Only Analog Mode)

9