GAS COOKTOP
INSTALLATION INSTRUCTIONS
Please read this guide thoroughly before installation.
BEFORE YOU BEGIN
Read these instructions completely and carefully.
Installation of this cooktop must conform with local codes, or in the absence of local codes, with the National Fuel Gas Code, ANSI Z223.1/NFPA.54, latest edition. In Canada, installation must conform with the current Natural Gas Installation Code, CAN/CGAB149.1 or the current Propane Installation Code,
As with any appliance using gas and generating heat, there are certain safety precautions you should follow. You will find these precautions in the Important Safety Information section in your User’s Guide. Read them carefully.
•IMPORTANT – Save these instructions for local electrical inspector’s use.
•IMPORTANT – Observe all governing codes and ordinances.
To contact LG Electronics, 24 hours a day,
7 days a week:
Or visit us on the Web at:
us.lge.com (U.S.A.) ca.lge.com (Canada)
Note to Installer: Leave these instructions with the appliance after installation is completed.
Note to Consumer: Keep the User’s Guide and Installation Instructions for future reference.
NOTE: This appliance must be properly grounded.
•The electrical diagram is in an envelope attached to the back of the cooktop.
•Skill level – Installation of this appliance requires basic mechanical skills.
•Proper installation is the responsibility of the installer.
•Product failure due to improper installation is not covered under the Warranty.
•Remove all tape and packaging.
•Make sure the burners are properly seated and level.
•Take the accessory pack off of the cooktop.
•Check to be sure that no cooktop parts have come loose during shipping.
P/No.: MFL62725501
