INSTALLATION INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE INSTALLATION
IN THE COMMONWEALTH OF MASSACHUSETTS
•This product must be installed by a licensed plumber or gas fitter.
•When using ball type gas
•A flexible gas connector, when used, must not exceed 3 feet in length.
FOR YOUR SAFETY
WARNING: If the information in this manual is not followed exactly, a fire or explosion may result causing property damage, personal injury or death.
WHAT TO DO IF YOU SMELL GAS
•Do not try to light any appliance.
•Do not touch any electrical switches,
•Do not use any phone in your building.
•Immediately call your gas supplier from a neighbor′s phone. Follow the gas supplier instructions.
•If you cannot contact your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency or the gas supplier.
PREPARING FOR INSTALLATION
TOOLS YOU WILL NEED
Phillips screwdriver |
|
| |
adjustable wrench | |
Pencil and ruler | Pipe wrench(2) |
| |
| (one for support) |
MATERIALS YOU MAY NEED
MATERIALS YOU MAY NEED
•Gas line
•To reduce the possibility of gas leaks, apply teflon tape or a thread compound approved for use with LP or Natural gases to all threaded connections.
•Flexible metal appliance connector (5/8” I.D.) A
•Flare union adapter for connection to gas supply line (3/4” or 1/2” NPT x 5/8” I.D.)
•Flare union adapter for connection to pressure regulator on cooktop. (1/4” NPT x 1/2” I.D.)
•Liquid leak detector or soapy water.
Sealant
Joint | Pipe Fittings | Shut Off |
Sealant |
| Valve |
Flexible Connector
2
