11
INSTALLATION DETACHMENT
Image shown may differ from your TV.
!
NOTE
When assembling the desk type stand, make sure the screws are fully tightened (If not tightened
fully, the TV can tilt forward after the product installation). Do not over tighten.
1Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2Assemble the parts of the STAND BODY
with the STAND BASE of the TV. At this
time, tighten the screws that hold the
STAND BODY on.
3Assemble the TV as shown.
4Assemble the part of the STAND REAR
COVER with the TV.
5Install the 4 screws into the holes shown.
1Carefully place the TV screen side down on
a cushioned surface to protect the screen
from damage.
2Remove the screws that hold the stand on.
3Detach the STAND REAR COVER from TV.
4Detach the stand from TV.
STAND INSTRUCTIONS

(For 32/42/47/55LE5400, 42/47/55LE5500, 42/47/55LE7500, 47/55LE8500, 42/47/55LX6500)

STAND BASE
STAND BODY
STAND REAR
COVER
M4 x 20
(47/55LE8500)
M4 x 16
(Other models)
M4 x 24
(55LE5400/5500/7500,
55LX6500)
M4 x 20
(47/55LE8500)
M4 x 16
(Other models)
Downloaded From TV-Manual.com Manuals