Operation
Operation
Turning on the Monitor
Turning on the Monitor just after installation
1.Connect power cord correctly.
2.Press the 
ON/OFF button on the Monitor. At this moment, the Monitor is switched to standby mode. Press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT
button on the remote control and then the Monitor will switch on.
Turning on the Monitor (power cord is still connected)
1. If the Monitor was turned off with the 
ON/OFF button on the Monitor
• Press the 
ON/OFF button on the Monitor to turn the Monitor on.
2. If the Monitor was turned off with the remote control and then the 
ON/OFF button on the Monitor
•Press the 
ON/OFF button on the Monitor and then press the INPUT SELECT button on the Monitor or press the POWER, INPUT SELECT button on the remote control to turn the Monitor on.
Menu Language Selection
-The menus can be shown on the screen in the selected language. First select your language.
1.Press the MENU button and then use D / E button to select the SPECIAL menu.
2.Press the G button and then use D / E button to select Language.
3.Press the G button and then use D / E button to select your desired language.
From this point on, the
4.Press the OK button to save.
VIDEO
AUDIO
TIME
SPECIAL
SCREEN
TWIN
|
|
| 한국어 |
Language | G |
| |
Key lock |
|
| English |
ISM Method |
|
| Español |
Low power |
|
| Português |
Set ID. |
|
| Français |
OSD Rotate |
|
|
|
|
|
|
|
MENU Prev. |
|
|
|
|
|
|
|
Owner’s Manual 15
