LG Electronics MU-50PZ44VR, MU-50PZ90 Brightness Command2h, Color Command2i, Tint Command2j

External Control Device Setup

08. Brightness (Command2:h)

GTo adjust screen brightness.

You can also adjust brightness in the Video menu.

Transmission

[k][h][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

•Refer to ‘Real data mapping 1’. See page 27.

Acknowledgement

[h][ ][Set ID][ ][OK][Data][x]

09. Color (Command2:i)

G To adjust the screen color.

You can also adjust color in the Video menu.

Transmission

[k][i][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

•Refer to ‘Real data mapping 1’. See page 27. Acknowledgement

[i][ ][Set ID][ ][OK][Data][x]

10. Tint (Command2:j)

G To adjust the screen tint.

You can also adjust tint in the Video menu.

Transmission

[k][j][ ][Set ID][ ][Data][Cr]

Data Red : 0 ~ Green : 64

•Refer to ‘Real data mapping 1’. See page 27.

Acknowledgement

[j][ ][Set ID][ ][OK][Data][x]

11. Sharpness (Command2:k)

G To adjust the screen sharpness.

You can also adjust sharpness in the Video menu.

Transmission

[k][k][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64

•Refer to ‘Real data mapping 1’. See page 27. Acknowledgement

[k][ ][Set ID][ ][OK][Data][x]

12. OSD Select (Command2:l)

G To select OSD (On Screen Display) on/off.

Transmission

[k][l][ ][Set ID][ ][Data][Cr]

Data 0: OSD off 1: OSD on

Acknowledgement

[l][ ][Set ID][ ][OK][Data][x]

13. Remote Control Lock Mode (Command2:m)

G To lock the remote control and front panel controls on the monitor

Transmission

[k][m][ ][Set ID][	][Data][Cr]
Data 0: Lock off	1: Lock on

Acknowledgement

[m][ ][Set ID][ ][OK][Data][x]

•If you’re not using the remote control and front panel con- trols on the monitor, use this mode. When main power is on/off, remote control lock is released.

14. PIP / Twin (Command2:n)

GTo control the PIP (Picture-in-Picture) or Twin Picture. You can also control the PIP/Twin picture mode using the PIP or TWIN PICTURE button on the remote control or in the Twin menu.

Transmission

[k][n][ ][Set ID][ ][Data][Cr]

Data	0: PIP/DW off	2: DW1
	1: PIP	3: DW2
Acknowledgement
[n][	][Set ID][ ][OK][Data][x]

15. PIP Aspect Ratio (Command2:o)

GTo select the PIP picture format.

You can also select the PIP picture format using PIP ARC on the remote control.

Transmission

[k][o][ ][Set ID][ ][Data][Cr]

Data 0: 4:3	1: 16:9
Acknowledgement
[o][ ][Set ID][	][OK][Data][x]

16. Split Zoom (Command2:p)

G To operate split zoom function and select the split zoom section number.

Transmission

[k][p][ ][Set ID][ ][Data][Cr]

Data Min: 21 ~ Max: 99

•Refer to ‘Real data mapping 2’.

Acknowledgement

[p][ ][Set ID][ ][OK][Data][x]

*Real data mapping 2

21:Selection 1 of 2 split zoom

24:Selection 4 of 2 split zoom

41:Selection 1 of 4 split zoom

42:Selection 2 of 4 split zoom

44:Selection 4 of 4 split zoom

45:Selection 5 of 4 split zoom

91:Selection 1 of 9 split zoom

99: Selection 9 of 9 split zoom

28 Plasma Monitor