Positioning the mounting brackets
Nylon spacers if
Applicable
(see chart) on page 4 and 5
Center mark
Inverted flat panel
Lay the left and right mounting brackets (stamped arrows facing out). See figure 4.
CAUTION: Check the chart on page 4 and 5 to see if your flat panel needs nylon spacers. The nylon spacers provided, must be used. Failure to do so will result in damaging the flat panel.
Install the nylon spacers to the mounting points on the flat panel see figure 3.
NOTE: See chart (if the nylon spacers apply to your flat panel).
Mounting brackets
Bottom of flat
panel
Arrows facing out
- 11 -
