Troubleshooting / Specifications
Troubleshooting
If the PCS100R is not connecting to the network, i.e., the IP Address field in the System Information display (see setup procedure on previous page) is blank:
1.Check the NETWORK connector on the rear panel of the PCS100R. Make sure the cable connection is tight and secure.
2.Observe the green LED on the NETWORK port. Once the PCS100R is connected to the network, the LED will be lit continuously.
3.Contact the network administrator to verify the network status.
Specifications
Dimensions |
|
Height: | 1.692 inches (42.977 mm) |
Width: | 19.0 inches (482.6 mm) (for EIA standard |
Depth: | 8.5 inches (215.9 mm) |
Weight: | 2.70 pounds (1.22 kgrms) |
Environmental Storage Conditions | |
Temperature: | |
| |
Humidity: | 95% |
Environmental Operating Conditions
Temperature (Tma): 0° to 35° Celsius
| 32° to 95° Fahrenheit | |
Humidity: | 95% | |
Electrical |
|
|
DC Input: |
| +12V DC @ 5 Amps |
Impedance at ASI Out jack: | 75 ohms | |
Level at ASI Out jack: | 800 mv | |
Ethernet: |
| 10/100/1000BaseT |
Note: Design and specifications subject to change without prior notice.
13 |
