Safety Instructions
| Power | WARNING |
|
|
|
Do not use too many plugs on the Mains multi-outlet.
It may result in overheating of the outlet and causes a fire hazard !
| Power | NOTES |
|
|
|
Never touch the power plug with a wet hand
This may cause an electric shock hazard !
Do not plug when the power cord or the plug is damaged or the connecting part of the power out- let is loose.
This may cause a fire or an electric shock hazard !
Hold the plug firmly when unplug- ging. If you pull the cord the cord may be damaged.
This may cause a fire hazard !
Ensure the power cord does not come into contact with sharp or hot objects such as a heater.
This may cause a fire or an electric shock hazard !
Prevent dust collecting on the power plug pins or outlet.
This may cause a fire hazard !
Place the projector where people will not trip or tread on the power lead.
This may cause a fire or an electric shock hazard !
Do not turn the projector On/Off by
It may cause mechanical failure or could give an electric shock.
| Using | WARNING |
|
|
|
Do not place anything containing liquid on top of the projector such as flowerpot, cup, cosmetics or candle.
This may cause a fire hazard !
In case of impact shock or dam- age to the projector switch it off and unplug it from the mains out- let and contact your service cen- ter.
This may cause a fire or an electric shock hazard !
Do not allow any objects to fall into the projector.
This may cause an electric shock hazard !
If water is spilt into the projector unplug it from the mains supply outlet immediately and consult your Service Agent.
This may cause an electric shock haz- ard !
Dispose of used batteries care- fully and safely.
In the case of a battery being swallowed by a child please consult a doctor immediately.
In the event that an image does not appear on the screen please switch it off and unplug it from the mains supply and contact your Service Agent.
This may cause a fire or an electric shock hazard !
Do not remove any covers (except lens cover). High risk of Electric Shock!
Don’t look directly onto the lens when the projector is in use. Eye damage may occur!
Do not touch metal parts during or soon after operation since the vents and lamp cover will remain very hot!
5
