Installing and Composition
Installation and Composition
Installation Instructions
* Don’t place the projector in the following conditions. It may cause malfunction or product damage.
Provide proper ventilation for this projector.
●The projector is equipped with ventilation holes(intake) on the bottom and ventilation holes(exhaust) on the front. do not block or place anything near these holes, or internal heat
●Do not place the projector on a carpet, rug or other similar surface. It may prevent a adequate ventilation of the projector bottom. This product should be mounted to a wall or ceiling only.
●Never push projector or spill liquid of any kind into the projector.
●Leave an adequate distance(30cm/12 inches or more) around the projector.
Place this projector in adequate temperature and humidity conditions.
●Install this projector only in a location where adequate temperature and humidity is available. (refer p.27)
Don’t place the projector where it can be covered with dust.
●This may cause overheating of the projector.
Do not obstruct the slots and openings of the projector. This may cause overheating and create a fire hazard.
The projector is manufactured using
This product should be used adequate length bolt(within 5mm) when installing it.
When applying a ceiling installer, use only the fixing bolt and ceiling installer for pro- jector. Contact your dealer for purchase or installation.
To display DTV programs, it is necessary to connect a DTV receiver
If there is no input signal, the Menu will not be displayed on screen.
12