LG Electronics RU-20LA80C Color Commandi, Tint Commandj, Sharpness Commandk, OSD Select Commandl

External Control Device Setup

08. Color (Command:i)

GTo adjust the screen color.

You can also adjust color in the Picture menu.

Transmission

[k][i][ ][Set ID][ ][Data][Cr]

Data Min : 0 ~ Max : 64

•Refer to ‘Real data mapping 1’. See page 27. Acknowledgement

[i][ ][Set ID][ ][OK][Data][x]

9. Tint (Command:j)

GTo adjust the screen tint.

You can also adjust tint in the Picture menu.

Transmission

[k][j][ ][Set ID][ ][Data][Cr]

Data Green : 0 ~ Red: 64

•Refer to ‘Real data mapping 1’. See page 27.

Acknowledgement

[j][ ][Set ID][ ][OK][Data][x]

10. Sharpness (Command:k)

GTo adjust the screen sharpness.

You can also adjust sharpness in the Picture menu.

Transmission

[k][k][ ][Set ID][ ][Data][Cr]

Data Min: 0 ~ Max: 64

•Refer to ‘Real data mapping 1’. See page 27. Acknowledgement

[k][ ][Set ID][ ][OK][Data][x]

11. OSD Select (Command:l)

GTo select OSD (On Screen Display) mute on/off.

Transmission

[k][l][ ][Set ID][ ][Data][Cr]

Data 0: OSD mute on 1: OSD mute off

Acknowledgement

[l][ ][Set ID][ ][OK][Data][x]

13. Tune Command (Command:m a)

GTune channel to following Physical/major/minor number.

Transmission

[m][a][ ][Set ID][ ][Data0][ ][Data1][Cr]

Data0: Channel Number

Min : 1 ~ Max : 0x7D(transmit by Hexadecimal code) Data1:TV-0, CATV-1 (transmit by Hexadecimal code)

Acknowledgement

[a][ ][Set ID][ ][OK][Data0][Data1][x] [a][ ][Set ID][ ][NG][Data0][x]

14. Channel Add/Del (Command:m b)

GTo add and delete the channels.

Transmission

[m][b][ ][Set ID][ ][Data 0][Cr]

Data0: (Channel)Delete-0, (Channel)Add-1

Acknowledgement

[b][ ][Set ID][ ][OK][Data0][x] [b][ ][Set ID][ ][NG][Data0][x]

15. Key (Command:m c)

GTo send IR remote key code.

Transmission

[m][c][ ][Set ID][ ][Data][Cr]

Data: Key code- Refer User’s Manual

Acknowledgement

[c][ ][Set ID][ ][OK][Data][x]

12. Key Lock (Command:m)

GTo lock the remote control and the front panel controls on the TV.

Transmission

[k][m][ ][Set ID][ ][Data][Cr]

Data 0: Lock off 1: Lock on

Acknowledgement

[m][ ][Set ID][ ][OK][Data][x]

•If you’re not using the remote control and front panel controls on the monitor, use this mode. When main power is on/off, remote control lock is released.

28