LG Electronics LSB316, SHS36-D Controlling a TV with the Supplied Remote Control, Operating

Operating 21

Controlling a TV with the Supplied Remote Control

You can control your TV using the buttons below.

Button	Operation
1(TV POWER)	Turn the TV on or off.
AV/INPUT	Switch the TV’s input source
	between the TV and other
	input sources.
VOL +/–	Adjust the volume of the
	TV.
PR/CH W/S	Scan up or down through
	memorized channels.

,,Note

Depending on the unit being connected, you may not be able to control your TV using some of the buttons.

Setting up the remote to control your TV

You can operate your TV with the supplied remote control.

If your TV is listed in the table below, set the appropriate manufacturer code.

1.While holding down 1(TV POWER) button, and press the manufacturer code for your TV with the numerical buttons (see the table below).

Manufacturer	Code Number
LG	1(Default), 2
Zenith	1, 3, 4
GoldStar	1, 2
Samsung	6, 7
Sony	8, 9
Hitachi	4

2.Release the 1(TV POWER) button to complete setting.

Depending on your TV, some or all buttons may not function on the TV, even after entering the correct manufacturer code. When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

3

Operating

HLS36W-NB_DUSALLK_ENG_6880.indd 21

2010-12-20 �� 9:30:59