Custom Master STB Setup (Cont.)

Custom Master STB Setup Procedure

1.Turn ON the STB/display panel.

The next step depends on whether the EZ-Manager Wizard appears on the screen when you turn ON the STB/display:

•If the wizard is displayed, the STB is in the required factory default state. Exit the wizard, and then continue with step 2.

•If the wizard is not displayed, restore the STB to a factory default condition before continuing with this procedure. See Reference section, “Restoring Factory Defaults on the STB(s),” as necessary, for further information.

2.Set Installer Menu items.

This step provides specific instruction only on the Installer Menu items that should be set on a Master STB. Refer to pages 25 to 34 for detailed information on all Installer Menu items.

a) Use the Installer Remote to access the PTC Installer Menu (see “Accessing the Installer Menu” on page 25 for further information).

b) Set Installer Menu item 003 BAND/AFC, as appropriate.

•

Broadcast: Set to 0.

•

HRC: Set to 2.

•

CATV: Set to 1 (default).

•

IRC: Set to 3.

c)Set any other Installer Menu items that affect your TV programming network to the required configuration. For example, set the panel display type (if applicable), enable/disable Aux inputs, set a Start Channel, etc.

If you intend to use a TLX file for cloning purposes, you may also configure selected settings in the IP Environment Menu (accessible from the Installer Menu). See “IP Environment Setup” on pages 56 to 63 for further information. In particular, if you intend to use the Wi-Fi

Zoning feature, you must configure the wireless network connection as part of the Master STB Setup. However, note that you cannot return directly to the Installer Menu from the IP Environment Menu; thus, you may wish to set all Installer Menu items as needed before you access the IP Environment Menu. Otherwise, you will need to reaccess the Installer Menu to set additional items.

d)After you have adjusted all Installer Menu item settings as required, press OK once on the Installer Remote to save your changes; then, press OK again to exit the menu.

STB_2000 PTC INSTALLER MENU

CPU-CTV

 

000

INSTALLER SEQ

000

 

 

 

 

 

 

 

UPN

000-000-000-000

ASIC D279

 

 

PTC

V1.00.020

STB V3.08.00

 

 

 

Typical Installer Menu

 

 

 

 

003 BAND/AFC

001

 

 

 

 

 

 

Adjust the value for this

Installer Menu item, as required.

(Continued on next page)

36

206-4256