Custom Master STB Setup (Cont.)

(Continued from previous page)

3. Set up STB/display panel features.

On-screen setup menus control the features of the STB/display. Press

 

 

 

 

MENU on the Installer Remote to access the STB setup menus, and

 

 

 

 

then set Channel, Picture, Audio, Time, etc. options to the desired

PICTURE

AUDIO

CHANNEL

TIME

configurations. See “Clonable STB Setup Menu Features” list on page

 

 

 

 

35 and also notes below.

 

 

 

 

Note: If you intend to use a TLX file for cloning purposes, and you

LOCK

OPTION

INPUT

SmartShare

wish to use the Zoning feature(s) on this STB, make sure to assign the

 

 

 

 

appropriate TV Zone # and/or Wi-Fi Zone # at this time as described in

Use the STB setup menus to set

Reference section, “Using the STB’s Zoning Features.”

the display features to the desired

Note: If you intend to clone the PTC, remember that only one STB

configuration for the end user.

source’s clonable setup menu settings will be cloned. Thus, the setup menu settings should be applicable to the analog or digital channel or Aux input to which the Target STB will be set during Teaching.

Note: If desired and if appropriate depending on the cloning method to be used (see “Cloning Methods” on page 35), you can run Auto Tuning (see step 4) prior to completing this step.

Note: The next three steps (4 to 6) are applicable for PTC cloning only (i.e., cloning using a TLL file). If you intend to use a TLX file for cloning purposes, proceed directly to step 7 to verify the STB setup.

4.(PTC cloning only / Optional) Run Auto Tuning.

Note: If you run Auto Tuning with the intention to clone the resulting channel lineup and the Target STB(s) is/are to remain in Pass-through Mode, you MUST use a TLL file for this cloning purpose.

a)Use the Installer Remote to access the Channel Menu. Then, select Auto Tuning and follow the on-screen instructions to search for all available analog and digital channels.

b)Use the Channel Edit option in the Channel Menu to edit the channel lineup, as necessary. Add/delete channels per your system requirements.

c)Use the Channel Label option in the Channel Menu to select the appropriate trademark/icon for each channel’s Channel-Time on-screen display. Icons are available for familiar channels, such as ABC, CBS,

NBC, etc. Identifiable labels (icons) should enable the end user to readily know what common networks are available.

Note: If Installer Menu item 103 ATSC TUNE MODE is set for Physical Channel tuning (default and recommended setting), channels with minor channel numbers higher than 255 will not transfer correctly in step 5. If item 103 is set for Virtual Channel tuning and either the major or minor channel numbers are higher than 255, the channel(s) will not transfer correctly in step 5.

Note: You can add the channel icons in this step or as described in step 6. Also in step 6, you can add custom text labels for channels without icons.

CHANNEL

• Auto Tuning

• Manual Tuning

• Channel Edit

• Channel Label

(Optional) Use Channel Menu options to run Auto Tuning, edit channels, and select channel icons.

(Continued on next page)

206-4256

37