Chapter 2. Basic Functions
Turning the Phone On and Off
Turning the Phone On
1.Install a charged battery pack or connect the phone to an external power source such as the cigarette lighter adapter or car kit.
2.Press 
for a few seconds until the red light on the middle of the phone flashes.
Fully extend the antenna for the best performance.
Like any other radio device, avoid any unnecessary contact with the antenna while your phone is on.
Turning the Phone Off
1.Press and hold 
until display screen will be turned off, and then release the key.
2.Protect the antenna by pushing it back into the phone, if extended.
Making a Call
When you make a call, follow these simple steps:
1. Make sure the phone is turned on.
If not, press
.
2.Enter the phone number with area code, if needed.
3.Press 
.
If the phone is locked, enter the lock code.
“Call Failed” indicates that the call did not go through.
4.Press 
to disconnect the call.
5.“This phone has been restricted” on display screen means that outgoing call restricted mode is turned on.
If you want to turn off this function, take the following step.
[Menu] 
[6] Security 
Lock code insert [2] Restrict 
“No” [Ok]
Correcting Dialing Mistakes
If you make mistakes in dialing a number, press 
once to erase the last entered digit or hold down 
for at least two second to delete all digits, or simply press Soft Key 2 Back to exit dialing state.
Receiving Calls
1. When the phone rings, open cellcase or If
cellcase is open, press any key (except ,
,
) to answer.
If you press the | , Side Keys ( | ) once |
when you receive a call, you can hold the
present call and ring sound or vibration stops.
If you press the | , Side Keys ( | ) twice, |
the present call is terminated.
18 | 19 |
