When you enter a service area, the phone displays “Entering Service Area” message.
When you leave a service area, the phone displays “Leaving Service Area” message.
4. Call Connect (Menu 
)
Alert tone notify the user of the time when the call is connected.
Display (Menu 
)
Backlight (Menu 
)
Choose the settings of the LCD and keypad backlight. “10 seconds” turns the backlight off 10 seconds after the last key was pressed. “30 seconds” turns the backlight off 30 seconds after the last key was pressed. “On when Cellcase open” means that the backlight is always on while cellcase is open. “Always off” means that the backlight is never on.
Banner (Menu 
)
Allows you to enter or change the character field(up to 16 characters) displayed on the main screen. Press Soft Key 1 Opt and select [Edit] using the [
] key press Soft Key 1 Sel , to make changes to the existing banner. Enter the characters as you would when storing a name tag to a memory location. Then press Soft Key 1 Save .
Theme (Menu 
)
You can set up the screen displayed on the LCD screen in the standby mode. (Default, Star theme)
Language (Menu 
)
Set the
Version (Menu 
)
View the software and PRL version.
System (Menu 
)
System Select (Menu 
)
Choose setting to control which cellular company your phone uses. Leave this setting as default unless you want to alter the system selection. (As instructed by your service provider.)
Home is B (Automatic_B, Automatic_A, Home only) is displayed.
Set NAM (Menu 
)
Select the phone’s NAM (Number Assignment Module) if the phone is registered with multiple service provides.
Auto NAM (Menu 
)
Allows the phone to automatically switch to one of the programmed Telephone No. if it is operating in the corresponding service provider area.
Force Call (Menu 
)
Make next call in analog mode. You have 30 seconds to place an analog call. This feature is typically used for data applications.
34 | 35 |
