3)Select one out of the following: Press [Hard Pause].
Press [Time Pause].
4)Enter additional number(s) (e.g. pin number or credit card number).
5)Press Soft Key 1 Opt and press Soft Key 1 Sel , the
6)The phone will ask you for the memory location where the number will be saved. Press Soft Key 1 Next to automatically store the number in the first available memory location. You also have the option to enter a specific
(Entry 9 is designated to emergency call)
7)Select your desired label types(Home, Office, Mobile,
Pager, Data / Fax) using .
8)Enter a name (up to 16 characters) and then press Soft Key 1 Save . If you do not want to enter a name, press Soft Key 1 Save to proceed directly to the next number.
9)You may select the desired ID ring type, secret, and
voice recognition option using .
10) Press Soft Key 1 Save when you are done.
3.“Prepending” a Stored Number : “Prepend” can be used if you are out of your home system and
need to add the area code to an existing phone book number. When a phone book entry or message callback number shows up on the display, you can make addition to the beginning of the original number. However, you cannot edit the original number during “Prepending”.
1)Recall a number in memory.
2)Enter the appropriate digits to prepend numbers and the phone number.
3)Press .
30 | 31 |