LG Electronics VX1 manual Date Baud, Auto Answer, Data Baud Menu Press two times

Data Baud (Menu Press two times, , )

This setting enables the subscriber terminal to set the data baud.

1.Press Soft Key 1 Menu.

2.Press two times.

3.Press Data Setting and press

Date Baud.

4.Select an option, press Soft Key 1

Ok.

Data Baud set 19,200/115,200 /230,400

Data Baud needs to be set properly based on carrier’s network. Contact carrier for the maximum available speed.

When using 1X HSPD data service by means of a RS-232C data cable, data baud shall be set to 115,200. (230,400 shall not be supported). When using 1X HSPD data service by means of USB data cable, you may get better data speed if the data baud is set to 230,400 rather than 115,200.

Auto Answer ( Menu Press two times, )

Select the ring type before the phone automatically answers a call. This feature is used only with the car kit.

1.Press Soft Key 1 Menu.

2.Press two times and press

Auto Answer.

3.Select an option and press Soft Key

1Ok.

Off

after 1 ring (or melody for 5 seconds) after 3 rings (or melody for 10 seconds)

When you have an incoming call, the phone automatically responds after 1 ring/ 3 rings.

Auto Answer works only when the cellcase is open.

Menu Feat ures

58 59