LG Electronics VX9200Maroon, enV3 manual Getting Started with Your Phone, Charging the Battery

Models: VX9200Maroon enV3

1 155
Download 155 pages 46.14 Kb
Page 22
Image 22

Getting Started with Your Phone

The Battery

NOTE It is important to fully charge the battery before initial use of the phone.

The phone comes with a rechargeable battery. Keep the battery charged while not in use in order to maximize talk and standby time. The battery charge level is shown at the top of the LCD screen.

Installing the Battery

To install the battery, insert the top edge (opposite the battery terminals) of the battery into the opening on the back of the phone. Push the battery down until it clicks into place.

Removing the Battery

Turn power off. Slide the battery release latch away from the edge of the battery, then lift the edge of the battery to remove it.

Charging the Battery

Your enV® 3 device comes with a cableless travel adapter and a USB data cable which are connected together to charge your phone. To charge your phone:

NOTICE

Please use only an approved charging accessory to charge your LG phone. Improper handling of the charging port, as well as the use of an incompatible charger, may cause damage to your phone and void the warranty.

20

Page 22
Image 22
LG Electronics VX9200Maroon, enV3 manual Getting Started with Your Phone, Charging the Battery, Installing the Battery