Installing the Wall mount plate
This monitor satisfies the specifications of the Wall mount plate or the interchange device.
1. After moving the product to face downward, make sure to place it on a soft cloth or a cushion to avoid surface damage.
2. Separate the head and the stand with the use of a screwdriver.
3. Install the Wall mount plate.
Wall mount plate (Separate purchase)
-Be sure to use screws and a wall mount that meet VESA standards.
- Using screws longer than those recommended might damage the product.
- Using screws that do not meet VESA standards might either damage the product or result in it coming away from the wall.We will not be held responsible for any damage resulting from failure to follow these instructions.
< Screw Mounting Interface Dimension >
Hole spacing : 100 mm x 100 mm
Kensington Security Slot Connected to a locking cable that can be purchased separately at most computer stores.
27
