Connecting the Display
Connecting with the PC/AV equipment
1. | Before setting up the monitor, ensure that the power to the monitor, the computer |
2. | system, and other attached devices is turned off. |
Connect signal input cable 1 and power cord 2 in order, then tighten the screw |
of the signal cable.
AConnect
BConnect
CConnect HDMI Cable
NOTE
This is a simplified representation of the rear view.
This rear view represents a general model; your display may differ from the view as shown.
HDMI |
Varies according to model.
HDMI Headphone Output
Headphone
/Earphone
C
B A
PC
PC
AV equipment
*HDMI is optimized on the AV equipment.
*Not supported PC
When using a D-Sub signal input cable connector for Macintosh
Mac adapter : For older Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row)
9