Samsung LN46A950 setup guide Connecting a VCR

Connecting a VCR

Video Connection

TV Side Panel TV Rear Panel

	Unplug the cable or antenna
1
	from the back of the TV.

IN4	VCR Rear Panel
HDMI

3	RF Cable
	(Not supplied)

5 Audio Cable (Not supplied)

4 Video Cable (Not supplied)

Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.

	Connect the cable or antenna
2
	to the ANT IN terminal on the
	back of the VCR.
	Connect an RF Cable between
3
	the ANT OUT terminal on the
	VCR and the ANT IN terminal
	on the TV.
	Connect a Video Cable
4
	between the VIDEO OUT jack
	on the VCR and the AV IN 1
	[Y/VIDEO] or AV IN 2 [VIDEO]
	jack on the TV.
	Connect Audio Cables between
5
	the AUDIO OUT jacks on the
	VCR and the AV IN 1 (or AV IN 2)

[R-AUDIO-L] jacks on the TV.

➣Each VCR has a different back panel configuration.

➣When connecting a VCR, match the color of the connection terminal to the cable.

➣When connecting to AV NI 1, the color of the AV IN 1 [Y/VIDEO] jack (Green) does not match the color of the video cable (Yellow).

➣If you have a “mono” (non-stereo) VCR, use a Y-connector (not supplied) to connect to the right and left audio input jacks of the TV. Alternatively, connect the cable to the “R” jack. If your VCR is stereo, you must connect two cables.

S-Video Connection

TV Rear Panel

VCR Rear Panel

3	Audio Cable
	(Not supplied)
2	S-Video Cable
	(Not supplied)
1	RF Cable
	(Not supplied)

	To begin, follow steps 1–3 in the
1
	previous section to connect the
	antenna or cable to your VCR
	and your TV.
	Connect an S-Video Cable
2
	between the S-VIDEO OUT jack
	on the VCR and the [S-VIDEO]
	jack on the TV.
3	Connect Audio Cables between
	the AUDIO OUT jacks on the VCR

and the AV IN 1 [R-AUDIO-L] jacks on the TV.

An S-Video cable may be included with a VCR. (If not, check your local electronics store.)

➣Each VCR has a different back panel configuration.

➣When connecting a VCR, match the color of the connection terminal to the cable.

English-