34 DLPProjection TV
Operation
- PIPlets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other
source will show a smaller inset image.
- Twin Picture mode splits the screen into 2, allowing 2 picture sources to be shown on the TV screen at the same time. Each
source is given half the screen.
- If you set the block/rating for Lock menu options in PIP/Twin Picture mode, “Rating Blocked” doesn’t display on screen.
Press the PIPbutton to access the sub picture. Each press of PIP changes the PIP options as shown below.
PIPOff
PIPMode Twin Picture Mode
1. Press the PIP button.
2. Select the Antenna or Cable option on the Sub input menu or with the PIP INPUT button. Use the PIPCH+ /
PIPCH-button to select a channel for the sub picture.
(You can’t select TV for main and sub picture simultaneously).
Repeatedly, use the SWAPbutton to switch the main and sub pictures.
•Component 1, Component 2, RGB-PC (or RGB-DTV), HDMI1/DVI, HDMI2 input sources for the main picture can’t
be used to swapthe main and sub pictures.
Use the PIPINPUT button to select the input source for the sub picture. Each press of PIP INPUT button changes
the PIPsource. You can also select sources for the Sub Input in the SETUP menu.
Main Picture Source Available Sub Picture Sources
DTV, Analog Video, and Front Video
Sub Picture Main Picture Sub Picture
Main Picture
Remote ControlRemote Control

PIP (Picture-In-Picture) / Twin Picture

W
Watching PIP/T
atching PIP/Twin Picture
win Picture
Selecting an Input Signal Source for PIP/T
Selecting an Input Signal Source for PIP/Twin Picture
win Picture
Swapping the PIP
Swapping the PIP/T
/Twin Picture
win Picture
TV Program selection for PIP
TV Program selection for PIP