Operation

Channel Label Setup

-Choose preset labels for your channels.

-If a channel label is provided on the signal from the broadcasting station, the TV displays a short name for a DTV chan- nel - even if you didn't preset a label for the channel.

1.Press the MENU button and then use D / E button to select the SETUP menu.

2.Press the G button and then use D / E button to select Channel Label.

3.Press the G button. You will now see a screen filled with Labels and a preview screen.

4.Use the CH D / E button to select a channel to Label.

5.Use D / E / F / G button to select the appropriate label for the channel, then press ENTER button to set the Label to the selected channel.

- If you press ENTER button in TV viewing mode, you will see the channel banner.

CADTV 27-1

Dolby Digital HD

CNN

Main Picture Source Selection

-Changes the picture source so you can watch your off-air TV, cable TV, VCR, DVD, or any other devices that are connected to your TV.

1.Press the MENU button and then use D / E button to select the SETUP menu.

2.Press the G button and then use D / E button to select Main Input.

3.Press the G button and then use D / E button to select the source: Antenna, Cable, Video1, Video2, Front Video, Component1, Component2, RGB-DTV (or RGB-PC), HDMI1/DVI or HDMI2.

4.Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

Input Label

1.Press the MENU button and then use D / E button to select the SETUP menu.

2.Press the G button and then use D / E button to select Input Label.

3.Press the G button and then use D / E button to select the source: Video1, Video2, Front Video, Component1, Component2, RGB, HDMI1/DVI or HDMI2.

4.Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.

Owner’s Manual 23

Page 23
Image 23
LG Electronics Z44SZ80, Z52SZ80 warranty Channel Label Setup, Main Picture Source Selection