2.3.2Mount the Unit and Attach it to the Cabinet
1.Lift the unit with bracket attached and hang it on the door, as shown at right. Ensure that the bracket rests safely on top of the top edge of door.
2.Move the unit sideways into the desired position. Ensure that the unit does not interfere with operation of the door latch.
3.Place screws through the middle and lower mounting holes of the XDA mounting angle and then through the door. Place nuts on the screws and tighten them.
4.Remove the nuts that attach the bracket to the unit and remove the bracket.
5.Lean the top of the unit slightly away from the door and remove the screws.
6.Install screws in the top holes in the same manner as in the mid- dle and bottom holes. Tighten all nuts and screws.
4
