Operation and control elements
You are advised to clean the appliance before switching it on for the first time (see "Cleaning").
Switching the appliance on and off
W Switching on: Press the on/off button 3 so that the temperature display lights up or flashes.
- The lighting will light up when the door is open.
W Switching off: Press the on/off button for approx. two seconds so that the temperature display goes out.
Setting the temperature
The appliance is
In the refrigerator:
W To reduce the temperature:
Press the DOWN button 2.
W To increase the temperature:
Press the UP button 2.
-ture will flash on the display.
-When you press the temperature setting buttons for the first time, the most recent setting (known as the "refer- ence setting") is displayed.
-You can change the settings in increments of 1°C by briefly pressing the buttons again. If the buttons are held down the temperature setting will change faster.
-The system switches over automatically about 5 seconds after the button was last pressed and displays the aver- age cooling temperature (known as the "actual setting").
-You can change the temperatures in the refrigerator be- tween 9°C and 4°C.While you are entering the temperature, the set tempera-
WThe temperature in the BioFresh compartment is con- trolled automatically, between 0°C and 3°C.
If you require a higher or lower temperature, e.g. for storing fish, you can alter the temperature setting in the BioFresh compartment. See "Additional functions" for more information.
Temperature display
The average temperature in the refrigerator compart- ment is displayed in normal mode.
If "F0" to "F 5" appears in the display, the appliance has a fault. Consult the customer service department indicating the fault number displayed, so that they can arrange for your appliance to be serviced accurately and quickly.
Audible warning signal
The audible warning signal helps you to protect the food in your refrigerator and save energy.
- It will sound when the door has been open for longer than about 1 minute.
W The signal will stop when you press the audible warning on/off button 5,
- and when you close the door.
- The audible warning on/off button only works when the door is open. Once the door is shut, the alarm function automatically switches to standby.
SuperCooling
The SuperCooling function switches the appliance to the coldest chilling setting.
It is ideal if you want to chill large quantities of food, drinks or freshly prepared cakes or meals very quickly or if you want greater humidity, e.g. for salad leaves.
W To switch on: Press the SuperCooling button 4 briefly so that it lights up. The refrigerator temperature will drop to its lowest value.
NB: The SuperCooling function uses slightly more energy. After approx. 6 hours, however, the appliance switches back automatically to normal
Additional functions
In
Activating set-up mode:
W Press SuperCooling button for approx. 5 secs - the Super- Cooling button flashes - the display shows c for child- proof lock.
Note: the value to be altered flashes.
W Select the required function by pressing the Up/Down but- ton:
c =
b = BioFresh temperature.
W Now select/acknowledge function by pressing Super- Cooling button briefly:
• For c =
the SuperCooling button. When the symbol 6 is
lit, the
• For h = brightness, press Up/Down button to select h1= minimum to h5 = maximum bright- ness and acknowledge with the SuperCooling button.
• For b = BioFresh temperature, press the 
Up/Down button to select from b1 = lowest 
to b9 = highest setting and confirm with the Super- Cooling button. The altered BioFresh temperature adjusts slowly to the new value.
NB: b5 = factory setting. By decreasing the tempera- ture, "b4" to "b1", minus temperatures can be reached and the food in the BioFresh compartment will freeze slightly.
Exit set-up mode:
W To exit the
2 mins. the electronic system switches over automatically. - The normal operating mode is activated again.
GB
* Depending on model and options | 15 |
