OPERATION
Audible Door Alarm - BioFresh Compartment
The alarm sounds when the door has been left open for longer than approximately 60 seconds. The sound
Audible/Visual Temperature Alarm - Freezer Compartment
The audible/visual alarm will sound and display will flash if the freezer temperature is not low enough (depending on the temperature setting).
This can be caused by:
•“warm,”fresh food being placed in the freezer.
•too much warm air from the outside is entering when
The temperature display will continue to flash until the cause has been rectified. It will then stop flashing and temperature will display. The audible warning signal will also reset.
Power Failure/Frost-Control
Display - Figure 1
If 
appears in the display, this means the freezer temperature has risen too high
during the last few hours or days due to a power failure.
•If you press the Alarm button (Fig. 1, 5) while the display is reading, the highest temperature registered during the power failure will be displayed.
•Check the quality of the food in case it has become too warm or even defrosted.
•The highest temperature will appear for approximately one minute. After that, the actual temperature in the freezer will reappear. The display can be turned OFF by repeatedly pressing the Alarm button.
Once the power is
SuperFrost
Fresh food should be frozen to the core as rapidly as possible. Frozen food can also be given a cold boost. This is provided by the SuperFrost feature (Fig. 1, 4) and ensures the nutritional value, appearance and flavor of the food remains intact.
•The maximum amount of food which can be frozen in 24 hours is shown on the type plate, freezing capacity, weight in 24 hours (Fig. 1, 31). For more information, refer to Freezing with SuperFrost.
BioCool
The BioCool button switches the BioFresh compartment to maximum cooling. It is recommended to cool large quantities of food, freshly baked cakes or meals rapidly.
•To turn ON: Press the BioCool button (Fig. 1, 10) briefly. When the symbol is lit, BioCool is activated.
Note
The BioCool function uses slightly more energy. After approximately six hours, the electronic control system will automatically switch back to normal
The BioCool function can be turned OFF sooner.
•To turn OFF: Press the BioCool button, if the indicator is lit and BioFresh will turn OFF.
* Depending on model and options
BFI/BF1055 (7082 | 7 |
