OPERATION
Safety Regulations
The appliance complies with UL250 and is designed to cool, freeze and store food and to make ice (if equipped). It is designed as a household appliance. If used commercially, the relevant regulations on commercial use must be observed.
The appliance is set to operate within specific ambient temperature limits according to its climate rating. These temperature limits should not be exceeded. The correct climate rating for your appliance is indicated on the model plate.
This is explained as follows:
Climate |
|
Rating | Set for Ambient Temperatures of |
|
|
SN | 50°F to 90°F (10°C to 32°C) |
N | 61°F to 90°F (16°C to 32°C) |
ST | 65°F to 100°F (18°C to 38°C) |
T65°F to 109°F (18°C to 43°C)
-The refrigerant circuit has been tested for leaks.
-The appliance complies with current safety regulations and EC directives 73/23/EEC and 89/336/EEC.
We recommend cleaning the appliance before turning it ON for the first time. See Cleaning. Turn ON the appliance several hours before loading it with frozen food for the first time. Do not load with frozen food until the temperature shows approximately 0°F
•The interior light will turn ON when the refrigerator door is open.
•The freezer compartment display will display lines until a temperature less than 32°F (0°C) is reached.
Setting the Temperature - Figure 1
The appliance is
The appliance is
To reduce the temperature:
Press the (DOWN) button; (8) on left for BioFresh compartment and (2) on right for the freezer compartment.
To increase the temperature:
Press the (UP) button.
The temperature in the BioFresh compartment is controlled automatically, between 33°F to 35°F (0°C and 2°C). If you want a higher or lower temperature, for example, for storing fish, you can alter the temperature setting in the BioFresh compartment. The setting range is displayed as between b1 and b9. The default factory setting is b5.
!WARNING
Do not allow children to play with the appliance. Children must not climb, sit or stand on the shelves, drawers or door.
Turning the Appliance ON and
OFF - Figure 1
Clean the appliance before turning it on for the first time. See Cleaning.
Allow the appliance to operate approximately two hours before placing food in it. DO NOT place frozen food in the freezer until the temperature shows at least 0°F. The refrigerator and freezer compartments can be operated separately.
1.Turning ON: Press the Refrigerator ON/OFF button (Fig. 1, 9) and the Freezer ON/OFF button (Fig. 1, 3) so the Temperature Displays (Fig. 1, 1) and (Fig. 1, 7) light up or “flash.”
The temperature can be changed by ± 5 increments, displayed in the temperature display.
Note
By decreasing the temperature, b4 to b1, minus temperatures can be reached and the food will freeze slightly.
For the freezer compartment, the setting range is displayed between 7°F and
While you are entering the temperature, the set temperature will flash on the display.
When you press the temperature setting buttons for the first time, the most recent setting is displayed.
* Depending on model and options
BFI/BF1055 (7082 | 5 |
