Liebherr 7085592-01 manual Malfunctions, Decommissioning, Switching off the appliance

Malfunctions

WARNING

Risk of injury if repair work is not carried out professionally!

u Have any repairs and action - not expressly specified - on the appliance and mains cable carried out by service personnel only. (see Maintenance)

u Read the appliance designation

Fig. 11 (1), service No. Fig. 11 (2) and serial No. Fig. 11 (3) off the type plate located inside the appliance on the left- hand side.

Fig. 11 u Notify the customer service, specifying the fault, appliance designation Fig. 11 (1), service No. Fig. 11 (2) and serial No.

Fig. 11 (3).

w This will help us to provide you with a faster and more accu- rate service.

u Keep the appliance closed until the customer service arrives.

w The food will stay cool longer.

u Pull out the mains plug (not by pulling the connecting cable) or switch off the fuse.

7 Malfunctions

Your appliance is designed and manufactured for a long life span and reliable operation. If a malfunction nonetheless occurs during operation, check whether it is due to a handling error. In this case you will have to be charged for the costs incurred, even during the warranty period. You may be able to rectify the following faults yourself:

Appliance does not work.
→	The appliance is not switched on.
u	Switch on the appliance.
→	The power plug is not properly inserted in the wall socket.
u	Check power plug.
→	The fuse of the wall socket is not in order.

uCheck fuse.

The compressor runs for a long time.

→ The compressor switches to a low speed when little cold is needed. Although the running time is increased as a result, energy is saved.

u This is normal in energy-saving models. → SuperFrost is activated.

u The compressor runs for longer in order to rapidly cool the food. This is normal.

A LED on the bottom rear of the appliance (at the compressor) flashes regularly every 15 seconds*. → The inverter is equipped with a diagnostic LED. u The flashing is normal.

Excessive noise.

→ Due to the various speed steps, speed-regulated* compressors can generate different running noises.

u The sound is normal.

A bubbling and gurgling noise.

→ This noise comes from the refrigerant flowing in the refriger- ation circuit.

u The sound is normal.

A quiet clicking noise.

→ The noise is produced whenever the refrigeration unit (motor) automatically switches on or off.

uThe sound is normal.

A hum. It is briefly a little louder when the refrigeration unit (the motor) switches on.

→ The refrigeration increases automatically when the SuperFrost, function is activated, fresh food has just been placed in the appliance or the door has been left open for a while.

u The sound is normal.

→ The ambient temperature is too high. u Solution: (see 1.2)

Vibratory noise.

→ The appliance is not fixed to the ground. The running of the cooling unit therefore makes objects and adjacent furniture vibrate.

u Adjust appliance via the height-adjustable feet. u Move bottles and containers apart.

The SuperFrost button flashes together with the tempera- ture display.

→ There is a fault.

uPlease contact the after-sales service (see Maintenance).

All LEDs light up in the temperature display. → Demo mode is activated.

uPlease contact the after-sales service (see Maintenance).

The outer surfaces of the appliance are warm*.

→ The heat of the refrigeration circuit is used to prevent condensate from forming.

u This is normal.

The temperature is not cold enough.

→ The door of the appliance is not properly closed. u Close the door of the appliance.

→ Insufficient ventilation.

u	Clear ventilation grilles.
→	The ambient temperature is too high.
u	Solution: (see 1.2) .
→	The appliance was opened too frequently or for too long.
u	Wait to see whether the appliance reaches the required
	temperature by itself. If not, please contact the after sales
	service (see Maintenance).
→ Too much fresh food was placed inside without SuperFrost.
u	Solution: (see 5.6)
→	The appliance is too close to a source of heat (stove, heater
	etc).
u Change the position of the appliance or the source of heat.
The interior light is not on.
→	The appliance is not switched on.
u	Switch on the appliance.
→	The door was open longer than 15 min.
u	The interior light automatically switches off if the door has
→	been open for about 15 min.
	If the interior light is not on but the temperature display is lit,
	the bulb is faulty.

u Change the bulb (see Maintenance).

8Decommissioning

8.1Switching off the appliance

u Press the On/Off button Fig. 3 (1) until the display goes dark. Release button.

w If the appliance cannot be switched off, the child lock func- tion is active .

8.2 Taking the appliance out of service

uEmpty the appliance.

10 * Depending on model and options