PLANNING INFORMATION

Cabinet Opening Dimensions

 

Allow units to open a minimum of 90° to prevent

 

 

 

problems removing drawers. With the door opening

 

 

 

90°, you may have to move drawers slightly to clear

 

 

 

the door interior.

 

 

 

Refer to the minimum door clearances in the Pre-

ELECTRICAL OUTLET

 

 

Installation Specifications chart.

 

 

 

LOCATION

 

 

• Allow for a minimum 2" (5.08 cm) filler, for corner

 

 

 

cm)

 

 

installations, so the door can open to 90°. If

 

 

you’re using raised panels, consider using a

(17.8

 

 

 

 

wider filler.

7"

 

 

 

 

 

6" (15.2 cm)

 

 

• Use a filler strip when units are installed side by

 

 

side. The width of this filler strip will vary

 

 

 

 

 

 

depending on the configuration and panels used.

 

 

 

• Be sure to add the filler strip width to the finished

 

 

 

rough-in dimension. In any side by side

 

-751/2" (192 cm)

3/4"- (212.7 cm)

installation, add an additional 1/2" (1.27 cm) to

 

the combined numbers.

 

IMPORTANT

 

 

 

 

 

83

Refer to the scaled illustrations at the end of

 

 

this section for specifics on door openings

 

 

 

 

 

 

and filler size alternatives.

LOCATE WATER SUPPLY

 

 

WITHIN BOTTOM

cm)

 

 

SHADED AREA

 

 

3" (7.6

 

 

18" (45.7 cm)

 

 

29-1/2" (75 cm)

 

 

 

Figure 2

 

 

A delight in freshness

4

C 16/CI 16

Page 6
Image 6
Liebherr C 16, CI 16, 7080 359-02 installation instructions Planning Information, Cabinet Opening Dimensions